Hydrogen-rich water bottle/4000ppb+/230ml/Aviation grade aluminum&food grade material/high quality/Antioxidant Hydrogen Water
Model number: EHM-H13
Hydrogen content:3500~4000ppb
Material ：Aviation grade aluminum&food grade material
Charging port:Type--C
Waterproof level: |P67
Temperature of water : 0~60°C
Battery capacity: 1020mAh
Electrolyzation time : 5min
Using time:10~25times(Depending om water quailty and working period)
Capacity: 230ml
Product size:φ 65*197mm
Enhancing the Text:
Using a hydrogen-rich glass is convenient and effortless. By simply pouring water into the cup and pressing the switch, the glass generates healthy hydrogen-infused water in just a few minutes. However, to ensure optimal safety and effectiveness, some matters should be given careful attention when using these glasses.
1. It is crucial not to use hot water above 80°C for cleaning or electrolysis, as it may cause damage to the product structure.
2. The hydrogen-rich water cup can only be used with direct drinking water, pure water, mineral water, warm or cool boiled water, and tea (please clean the glass with clean water after using it to make hydrogen water). The use of any other liquids is strictly prohibited.
3. It is advised to prevent the cup from falling from a great height to avoid damaging the generator and potentially affecting normal operation.
4. Before filling the cup with drinking water, ensure that the cup body is tightly secured to the hydrogen generator to avoid any potential leakage.
5. Carefully monitor the water levels when filling the cup to prevent overflow- the water level should not exceed the upper part of the aluminum cup body.
6. To achieve long-lasting hydrogen-rich water, it is essential to tightly close the lid during the water ionization process to prevent hydrogen from quickly escaping.
1. To begin hydrogen production, long press the Start button for 3 seconds. The breathing lamp will light up and hydrogen production will commence.
2. Default hydrogen production time is 5 minutes.
3. Once hydrogen production is complete, the hydrogen-rich water cup automatically turns off the breathing lamp.
4. To stop hydrogen production midway, long press the Start button for 3 seconds to close the hydrogen-rich water cup and turn off the breathing lamp.
1. To activate cleaning mode, press the Start button 3 times within 5 seconds. The red breathing light will turn on, and the hydrogen-rich water cup will enter the reverse polar reverse cleaning mode.
2. Default cleaning time is 5 minutes. Please pour away the cleaning water and do not drink it.
To increase the concentration of hydrogen-rich water, simply press the button again after the first hydrogen production cycle has ended. However, it is recommended to not exceed 3 hydrogen production cycles.
After prolonged use, the hydrogen generator may emit unpleasant odors. To remedy this, pour hot water (60-80°C) with lemon slices into the cup and let it stand for 5 minutes. Then discard the water, clean the cup's interior with a soft brush, and reuse.
No, adding water to the cup is not required while charging.
Hydrogen-rich water is composed of water with added hydrogen, which is non-toxic and in compliance with national food safety standards. Therefore, it is safe to drink and will not have any side effects on the body.
It is advisable to use clean water to clean the cup and soak it with lemon slices. Strong descaling agents could damage the electrolytic sheet, so it is not recommended to utilize them.
Simultaneous hydrogen production and charging may result in battery drain. Thus, it is recommended to stop hydrogen production and charge the cup entirely when the red light begins to flash.
Comprehensive score